It is a single board microprocessor trainer based on 16 bit 8086 microprocessor, which is widely used to train engineers to develop software/hardware for any industrial process & control. This trainer consists of power-full monitor EPROM, RAM, l/O lines, timer/counter, serial, LCD display and keyboard for man to machine interface.

Features:-

• 16K bytes of EPROM with 16K bytes of battery backup ram.
• 72 I/O lines, three channel timer/counter, pc serial interface using usart, interrupt controller.
• 20x2 LCD display with 101 ASCII keyboard.
• Power-full command like single stepping, break point, full clock execution, examine memory/ register.
• Uploading & downloading to and from PC in Windows98/XP/NT.
• In-built power supply.

Specifications:-

• 8086/8088 CPU operating at 2.5/5MHz
• 8086 processor can be replaced by 8088 processor
• On-board sockets provided to facilitate the use of 8087 co-processor and 8089 I/O processor
• 16K bytes of RAM using two nos. of 6264 with battery backup expandable up to 256KB.
• 16K bytes of powerful monitor EPROM using two nos. of 27512
• 72 I/O lines through 3 nos. of 8255 brought at 26 Pins FRC connector to interface with IC-XX Series.
• 16 bit timer/counter through 8253 brought out at 20 pins FRC connector.
• RS-232C interface using 8251 brought out at 9 pins D-Type connector.
• On-board interrupt controller using 8259 brought out at 20 pins FRC connector.
• On-board using ADC 0809 & DAC 0800 .
• On-board real time clock using RTC-6424.
• On-board temperature sensor using LM35.
• 8 bit digital switch for 8 digital input and 8 led for 8 digital output.
• 20x2/40x2/20x4 alphanumeric LCD display with backlite
• 101 ASCII keyboard interface using 89C2051 operating @ 12MHz
• Powerful commands like examine/edit memory, examine/edit register, single stepping, execution, block move can be used through ASCII Keyboard.
• On-board single line assembler & disassembler.
• Facility for downloading/uploading files from/to PC.
• All address, data & control lines are available on KXT Bus 50 pin FRC connector to interface with SC-XX series.
• All ICS are mounted on IC sockets.
• Bare board tested glass epoxy SMOBC PCB is used.
• In-built power supply of +5V/2A, ±12V/250mA
• Attractive ABS plastic enclosures.
• User's manual with sample programs.

Interfacing Modules:-

• LOGIC CONTROLLOR INTERFACE + FRC
• FOUR DIGIT SEVEN SEGMENT DISPLAY + FRC
• DUAL CH. D/A USING DAC0800 CARD + FRC
• 8 CHANNEL A/D USING ADC0809 CARD + FRC
• 8259 PIC STUDY CARD + FRC
• 8253 PROGRAMMABLE TIMER STUDY CARD + FRC
• 8255 PPI STUDY CARD + FRC
• 8 X 8 LED MATRIX DISPLAY INTERFACE
• 8251 USART STUDY CARD + FRC + SERIAL CABLE
• 16x2 LCD INTERFACE + FRC
• 5x4 Key’s Matrix Keyboard Interfacing Module + FRC