5 MHz DDS Function generator

Order Code: 22235476.1

Category: General Lab Equipment II

Output frequency : 1μHz~5MHz Output waveform : 32 built-in waveforms, including Sine, Square, Triangle, Ramp,Pulse, etc. Waveform length : 1024 points Vertical resolution :8 bits Sampling rate :100MSa/s Sine Harmonic distortion : ≥...



SPECIFICATION

  • Output frequency : 1μHz~5MHz
  • Output waveform : 32 built-in waveforms, including Sine, Square, Triangle, Ramp,Pulse, etc.
  • Waveform length : 1024 points
  • Vertical resolution :8 bits
  • Sampling rate :100MSa/s
  • Sine Harmonic distortion : ≥40dBc (<1MHz); ≥35dBc (1~20MHz)
  • Total distortion : ≤1% (20Hz~200kHz)
  • Square Rise/fall time : ≤35ns
  • Overshoot : ≤10%
  • Duty cycle : 1%~99%

Frequency

  • Range Sine: 1μHz~5MHz
  • Range Square : 1μHz~5MHz
  • Range Other : 1μHz~1MHz
  • Resolution : 1μHz
  • Accuracy : ±5x10-5
  • Stability : ±5x10-6 /3hours

Sweep

  • Parameter : Frequency, Amplitude
  • Range : Free to set start and stop point
  • Time : 100ms~900s
  • Direction : Up, Down, Up-Down
  • Mode : Linearity, Logarithmic
  • Control : Auto sweep or manual sweep

Frequency Modulation (FM)

  • Carrier signal : CHA signal
  • Modulating signal : CHB or external signal
  • Deviation : 0%~20%


Shift Keying

 

  •  FSK : Free to set the hop frequency and the carrier frequency
  •  ASK : Free to set the hop amplitude and the carrier amplitude
  •  PSK : Hop phase: 0~360°, resolution: 1°
  •  Alternative rate : 10ms~60s

Burst

 

  •  Carrier signal : CHA signal
  •  Trigger signal : TTL_A signal
  •  Burst counts : 1~65000 cycles
  •  Trigger source : Internal TTL, External, Single


CHB output characteristics

 

  •  Output waveform : 32 built-in waveforms, including Sine, Square, Triangle, Ramp,Pulse, etc.
  •  Waveform length : 1024 points
  •  Vertical resolution: 8 bits
  •  Sampling rate : 12.5MSa/s
  •  Frequency range Sine: 1μHz~1MHz; Other: 1μHz~100kHz
  •  Frequency resolution : 1μHz
  •  Frequency accuracy : ±1x10-5
  •  Amplitude range : 50mVpp~20Vpp (open circuit)
  •  Amplitude resolution : 20mVpp
  •  Output impedance : 50Ω
  •  CHB signal is used as burst signal
  •  Carrier signal : CHB signal
  •  Trigger signal : TTL_B signal
  •  Burst counts : 1~65000 cycles
  •  Trigger source : Internal TTL, External, Single

TTL output

 

  •  Waveform : Square, rise/fall time ≤20ns
  •  Frequency: 10mHz~1MHz
  •  Amplitude : TTL, CMOS compatible, low<0.3V, high>4V
  •  

Frequency count

 

  •  Frequency range : 1Hz~200MHz
  •  Input amplitude : 100mVpp~20Vpp
  •  

Power amplifier (optional)

 

  •  Max. output power : 7W (8Ω), 1W (50Ω)
  •  Max. output voltage : 22Vpp
  •  Frequency bandwidth : 1Hz~200kHz

Enquiry Form