Basic Electrical Training System

Order Code: 22235818.12

Category: General Lab Equipment I

The following experiment should be performed by the Basic Electrical Training System: Insertion of resistances with different configurations Resistance measurements, Checking the Ohm's law, Series resistors, voltage divider, Parallel resisto...



SPECIFICATION

  • The following experiment should be performed by the Basic Electrical Training System:
  • Insertion of resistances with different configurations Resistance measurements, Checking the Ohm's law, Series resistors, voltage divider, Parallel resistors, current divider, series and parallel resistors, max. power transfer, Kirchhoff's principle, superimposition principle, Thevenin's theorem
  • AC voltage and current measurements
  • Diode insertion with different configurations Half-wave rectifier, Full-wave rectifier, Bridge rectifier, Voltage doublers
  • DC voltage and current measurements
  • Power measurements DC power measurement, Joule's law, AC power
  • Insertion of capacitors with different configurations Charge and discharge of a DC capacitor, series DC capacitors, parallel DC capacitors
  • Electromagnetic phenomena Inductance of a coil, coils in series, coils in parallel, Ohmic/inductive/capacitive circuits, RC circuit, RL circuit, series resonant circuit, parallel resonant circuit, Q-factor, coupled circuits, attenuators The transformer
  • Leveling filters Inductive circuit, capacitive input, LC filter
  • Lighting of a lamp with switch
  • Lighting of more lamps with switch
  • Lighting of a lamp with shunters
  • Lighting of a lamp with shunters and inverter
  • Lighting of a hotel room
  • Lighting of a file room
  • Lighting of one or more lamps with relay
  • Lighting of one or more lamps with step-by-step relay (M21-1100)
  • Acoustic signaling
  • Light signaling
  • Acoustic/light signaling
  • Main installed components:
  • General switch, fuse and signaling lamp
  • 1 Safety single-phase transformer 115-230V / 6-12-24 VAC-1 A
  • 2 Fuse-holder with fuse type 6x30-1A
  • 1 Moving iron ammeter with range: 0.5-1A
  • 1 Moving iron voltmeter with range: 25 V
  • 10 Resistors of different values (2 , 4 , 8 , 16 , 31.5 , 63 , 250 , 500 , 1000 , 2000 )
  • 1 linear rheostat 100 /25W
  • 4 Diodes 6A-100V
  • 2 Lamp-holder with 24-V signaling lamp
  • 1 24-Vac buzzer
  • 1 Electrolytic capacitor, 100 F25Vdc
  • 2 Electrolytic capacitors, 500 F25Vdc
  • 2 Inductances 60 mH 0.5 A
  • 2 Pushbuttons for general use
  • 2 Shunters for general use
  • 1 Inverter for general use
  • 1 Relay, 2 exchange contacts, 24 Vac coil
  • 1 Step-by-step relay, 24-Vac coil (M21-1100)
  • 1 Set of 25mm cables with 4-mm plug
     

Enquiry Form