Features

• Industrial-standard sensors and transducers
• With USB interface
• Open-ended design, ideal for expansion
• Offer a sensing data acquisition software

Specifications
Main Unit
Power Supply Unit
Fixed DC power supply
Output voltage : +5V, -5V, +12V, -12V
Max. output current : +5V/3A, -5V/0.3A, +12V/1.5A, -12V/0.3A
With output overload protection

A/D Converter

• 1x12-bit ADC
• Input voltage range : 0 ~ +5V
• Time pulse frequency : 3.58 MHz
• Control signals : Status, pole, over range indication

Interface Port

• USB interface : Type B

D/A Converter : 1 x 12-bit DAC

• Analog output & control
• OUT+ : +DC OFFSET 0V ~ +4.096V unipolar
• OUT- : -DC OFFSET 0V ~ - 4.096V unipolar
• OUT BP : DC OFFSET -2.048V ~ +2.048V bipolar
• Preset Level
• Max. value : 4095
• Status Display & DCV
• Input voltage measurement
• Range : 2000mV, 20V
• Accuracy : ±0.05% of reading + 4 counts
• Input impedance : 10MΩ
• Display : 4 ½ digits
• Mode Selector
• Manual / single-chip
• Buzzer
• Maximum input signal voltage : +12V
• Micro controller Signals
• Control line outputs
• Model Holder : X4
• Potentiometer : 100KΩ B-type
• Comparator V-,V+ input, Vo output
• Differential amplifier V-,V+ input, Vo output
• Instrumentation amplifier V-,V+ input, Vo output, adjustable gain

Experiment Modules

• Using 2mm plugs and sockets
• Comprehensive experiment manual
• Modules secured in plastic housings
• Connected by 2mm-2mm test leads
• Dimension : 255 x 165 x 30mm
• Circuit symbols, blocks and components printed on the surface of each module
• Power supplied from KL-61001B main unit
• Graphic User Interface Software

System Requirements

• PC: 1GHz or faster 32-bit (x86)  or 64-bit (x64) processor, 1GB RAM, 1 GB more free disk space
• Operating System : XP/ Vista/ 7/8/10

Specification & Feature

• Real time acquire signal
• Adjustable acquire frequency
• Current, Min and Max value displayed
• Data save, load and print function
• X-axis : TIME/DIV, Y-axis : VOLT/DIV
• Storage format : Excel format

List of Modules

• Photo transistor
• Photo interrupter
• Magnetic (hall-effect) ~ digital
• Magnetic (hall-effect) ~ analog
• Pyroelectric detector
• Reed switch
• Thermistor
• Mercury switch
• Limit switch
• Vibration switch
• Condenser microphone
• Dynamic microphone
• Gas / smoke sensor
• Ethanol sensor

Humidity sensor

IC (AD590) temperature sensor

• Humidity transducer rated voltage : 1 Vp-p AC
• Frequency range : 100Hz ~ 10KHz
• Temperature range : 0°C ~ 60°C
• Humidity range : 20%RH ~ 90%RH
• Impedance : 13KΩ (70%RH at 25°C)

Infrared TX / RX sensor

• Infrared transmitter : Emission intensity : 12mW/sr(I = 50mA)
• Emission wavelength : 940nm(IF = 50mA)
• Infrared receiver : Sensitivity wavelength : 1000nm

Ultrasonic TX / RX sensor

• Norminal frequency : 40KHz
• Pressure sensor 0-7 psi to 0-30 psi pressure ranges

Strain gauge

• Maximum payload : <5kg
• Teminal resistance : 350 ± 50Ω

Hall current sensor

• Nominal current : ±3A
• Current range : ±9A
• Output voltage : ±4V, RL = 10 k Ohms

Proximity sensor

• Operation voltages : 10 ~ 30V DC
• Short circuit protection

CDS sensor

• Photovoltaic sensor
• Photovoltaic transducer open voltage = 2V
• Photovoltaic transducer close current = 0.06 μA/lx

V/F converter

• Input voltage : +10mV ~+10V
• Output frequency : 5Hz ~ 5KHz, 10Hz ~10KHz

F/V converter

• Input frequency : 0 ~ 4.3KHz ( ±0.2Vp ~ ±5Vp)
• Output voltage : 0 ~ 4.3V DC

RTD (PT-100)

• 0°C : 100Ω , 100°C : 139.16Ω
• Rating : 250°C

Level (Water)

• Simulation of the reservoir control status (motor included)

Fiber optic emitter

• Forward current, DC (lF) : 50mA
• Peak wave length : 950nm
• Output power : 50μw

Fiber optic phototransistor

• λpeak : 850nm
• Collect current (lC) : 50mA
• Power dissipation : 100mw

LVDT

• Range : ±5mm
• Scale : 0.01mm
• Optimum frequency : 50Hz ~ 1.1KHz; (Nominal : 350Hz)

Rotation angle sensor

• 10 turns (3600°) precision potentiometer
•  Linearity : ± 0.25%

List of Experiments

• D/A and A/D Converters
• Characteristics of Sensors
• Gas Sensors
• AD590 Temperature Transducer
• Hall Current Sensor
• PT100 Temperature Sensor
• Humidity Sensor
• Strain Gauge
• Linear Variable Difference Transformer (LVDT)
• Photovoltaic Cell
• Proximity Switch
• Infrared Transducer
• Ultrasonic Transducer
• Pressure Sensor
• V/F and F/V Converters
• CdS Cell
• Level Controller
• Fiber Optical Communication
• Rotation Angle Sensor
• Accessories
• Experimental manual
• Connection leads and plugs : 1 set

Documents

• Manufacturers Authorization Letter Submitted
• ISO Certificate submitted
• Catalog submitted
• Warranty: 01 year warranty with service.