Development Kit

Order Code: 22235680.5

Category: General Lab Equipment I

FPGA Development Kit: based on Intel Cyclone 10 GX FPGA P/N: 10CX220YF780E5G with 220K logic elements (LEs), Memory interfaces, 1 channel of x40 DDR3 SDRAM at 933 MHzCommunication ports, 10/100/1000 Base-T Ethernet port with RGMII...



SPECIFICATION

  • FPGA Development
  • Kit: based on Intel Cyclone 10 GX FPGA P/N: 10CX220YF780E5G with 220K logic elements (LEs), Memory interfaces, 1 channel of x40 DDR3 SDRAM at 933 MHzCommunication ports, 10/100/1000 Base-T Ethernet port with RGMII (LVDS), USB3.1 Type-C, supporting SuperSpeed, backward compatible with USB2.0, 2 x SFP+ supporting 10GbE, PCIe Gen2 x4,
  • FMC expansion card that can be used for: 12G
  • SDI: Semtech RDK-12GSRD-ALTRA00 evaluation card
  • 8G DisplayPort: Bitec FMC DisplayPort daughtercard
  • 6G HDMI 2.0: Bitec FMC HDMI daughtercard, Clock sources ; 50 MHz oscillator, LVCMOS for FPGA core, Programmable clock generator for FPGA core and transceiver (XCVR)100 MHz for PCIe, from PCIe system to FPGA XCVR, User-defined reference clock input from a FMC card, External differential input through SMA -AC coupled
  • Single-ended LVCMOS clock output through SMA -DC coupled, LED: 1 x power LED, 1 x config done LED, Parallel flash loader (PFL) load/error LED, PFL program number LED, Ethernet LEDs, SFP+ LEDs, Push button: 3 x user push buttons, I x user program selection, 1 x push button to initiate FPGA configuration, 1 x push button to reset the FPGA logic
  • Switches: User dual inline package (DIP) switches x4, DIP switch for FPGA configuration scheme selection, DIP switch for default image selection, DIP switch for JTAG chain selection, DIP switch for clock source selection,
  • FPGA Configuration: Active Serial (AS) x4 mode configuration with EPCQ-L, Fast passive parallel (FPP) configuration mode, Configuration via Protocol (CvP) with PCIe Gen2 x4
  • Power: Intel Enpirion point-of-load synchronous buck regulators with integrated inductors, On- board power measurement and management, Power-failure monitor, 12V power input from PCIe system or external power adaptor input.

Enquiry Form