Dual Chamber Muffle Furnace

Order Code: 22236021.1

Category: General Lab Equipment I

  Maximum Temperature : 1700°C for Short Time, Dimensions in mm : 400 x 300 x 300mm Continuous Working Temperature : 1600°C, Heater Type : Sic - Mosi2 Thermocouple : B Type, Rated Voltage : 220-380V,  Maximum Power...



SPECIFICATION

 

  • Maximum Temperature : 1700°C for Short Time,
  • Dimensions in mm : 400 x 300 x 300mm
  • Continuous Working Temperature : 1600°C,
  • Heater Type : Sic - Mosi2
  • Thermocouple : B Type,
  • Rated Voltage : 220-380V, 
  • Maximum Power : 1-16KW,
  • Controlled Environment : Inert Gas, N2, 02 Atmosphere Protect Available 
  • Vacuum Level : 1 x 10-3
  • Temperature contro l: 30 segments programmable and PID auto control,
  • Heating rate : <10°C/min,
  • Temperature accuracy : ±1°C,
  • The furnace should be a floor-mounted electric furnace for annealing in vacuum, inert gas, and air, atmosphere at a maximum working temperature of 1600 °C-1700 °C.
  • Silicon Carbide (SiC) – (Mosi2) (molybdenum silicide) heating elements situated on all walls and floor, ceramic modules with rows, 3 side heating. However, the elements should be concealed with any high temperature working sheet.
  • Process documentation, operation, and maintenance Manuel in English language CE Mark and Declaration of Conformity, Calibration list for all controllers.
  • Provision of additional spares i.e. two sets of complete heaters and five thermocouples with other electrical components.
  • The equipment should be completely assembled and should be ready for use prior to dispatch from the supplier's works. There are only to be installed at purchaser premises with a utility connection like Power. These connections should have to be done by the purchaser.
  • However, the supplier shall provide the necessary drawing, instructions, and manuals. In case the purchaser requires the visit of supplier's engineer for the installation/commissioning/assembling of this ready assembled equipment then it should be arranged free of charge, for safety and better performance of equipment.

Enquiry Form