Accuracy

1. All accuracy is claimed from 10% to 95% of the range.
2. Accuracy is specified as ±(% of reading + digits) and is valid 0 at 25 ± 3 C, £ 55% RH humidity.
3. It is recommended that calibration equipment to verify the instrument’s accuracy should be ten times more accurate.
4. Temp. Coefficient = (0.1% x specified accuracy) per degree centigrade referred to 25°C.
5. Accuracy is not valid if the display shows ‘LO BAT.’

General

1. Display : 6,000 counts dual LCD display with a white backlight.
2. Display Update Rate : 2.8 times per second nominal.
3. Dimensions (WxHxD) : 94 X 205 X 36 mm approx.
4. Weight : 450g. approx.
5. Dual Display : For AC voltage with frequency & frequency with duty cycle simultaneously

Environmental

1. Operating Temperature : 0°C to 50°C
2. Relative Humidity : 80% RH @ 5°C to 31°C
3. 50% RH @ 31°C to 40°C non condensing
4. Storage Temperature: – 20°C to 60°C

Power

1. Power Supply : 9V Battery Type 6F22 or equivalent
2. Power Consumption : 8mA typical.
3. Low Battery Indication : ‘LO BAT’ is displayed below 6.5V approx.
4. Auto Power OFF : After 15 minutes, ideal sleep mode
5. consumption is 1.3mA approx. (Can be canceled by pushing any except for the Hold & SELECT
6. key before powering on the meter).

Overload Protection

1. Fuse Protection for ‘μA’ & : 0.8 A/ 250V fast blow type ceramic fuse.
2. ‘mA’ input terminal
3. Fuse Protection for 10A : 20A/ 500V fast blow type ceramic fuse
4. input terminal
5. Ω/ / / / /Hz(%) : 440 V DC / AC rms

Safety

1. Directives for CE Certification : LVD:2006/95/EC., EMC: 2004/104/EC
2. Measurement Category : CAT III, (1000V) Reinforced Insulation.
3. Relevant Standard Specification : EN 61010-1:2010, EN 61326-1:2006
4. IP Rating (Dust & Water Protection) : IP 54

Accessories

1. Standard Accessories
2. Pair of Test leads, User Manual, Battery installed, Fuses, Carry Bag.

Optional Accessories

1. Pair of Test Leads, Pair of small Test Leads