Ductility Testing Apparatus

Order Code: 22236131.8

Category: General Lab Equipment II

Technical specification The apparatus consists of a water bath with a thermostatic heater, and a circulating pump to maintain uniform water temperature One half of the briquette moulds is fixed on a fixed plate in the water bath, the other ha...



SPECIFICATION

Technical specification

  • The apparatus consists of a water bath with a thermostatic heater, and a circulating pump to maintain uniform water temperature
  • One half of the briquette moulds is fixed on a fixed plate in the water bath, the other half of the briquette mould is fixed to a carrier which slides over a rotating threaded shaft with a clutch
  • The motor and gears to rotate the shaft are housed in a cabinet fixed above the other end of the bath
  • A pointer fixed to the carrier moves over a scale graduated from 0-110 cm x 1mm fixed on the bath with “0” (zero) of the scale towards the fixed plate side
  • The rotating shaft has 2 speeds of travel for the bracket, 5cm/min and 1 cm/min., selected by a clutch
  • Water bath inside is aluminium, it is an insulated water bath. Water bath is provided with a drain
  • A heater with thermostatic control is fixed inside the water bath
  • Control switches for motor, stirrer, heater and indicator lamps are fixed at a convenient place on the water bath, complete with three briquette moulds and one base plate, all made of brass
  • Operates on 230 volts A.C. single phase

 Accessories 

  • Thermometer IP 38 C, range 23ºC to 27ºC
  • Ductility mould with base-plate.

Enquiry Form