• Analyzing circuits and carrying  out systematic fault finding and  error elimination with restart
• Main components and the  measurement and control  equipment should be arranged as one unit which can beLayout transported easily
• Proper housing must be there in order to protect the sensors and other valuable components ,Pressure relief valve ,One-way flow control valve

Components

• Non-return valve, 0.6 MPa opening pressure
• 4/2-way solenoid valve, spring return
• 4/3-way solenoid valve, dosed mid-position
• 4/2-way double solenoid valve,
• Mounting kit for cylinders
• T-distributor x 2
• 4-way distributor with pressure gauge x2
• Pressure gauge x 2
• Pressure switch, electronic
• Relay, three-fold x 2
• Signal input, electrical
• l imit switch, electrical, left-actuated
• Limit switch, electrical, right-actuated
• Proximity sensor, electronic
• Hydraulic power pack with oil
• Workbook with exercises, sample solutions, exercise sheets and training notes
• Hydraulic hoses kit (7x600mm/2x1000mm14x1500m m) Approx.
• 4 mm Safety laboratory cables Minimum 90 pieces

Mountable Power Supply Unit 

• Supply voltage should be 230VAC, 1 Phase, 50Hz
• Output voltage: 24 V DC, short-circuit-proof
• Output current: max. 4.5 AApproximate
• dimensions: 170 x 240 x 90 mm Power Supply
• Power Connector asper BS 1363

Technical Specifications 

• Safety Laboratory Cables Conductor cross section: 1 mm2 1000V 
• CAT II
• Plugs with rigid protective sleeve and axial socket
• 9 Rated current: 16 A
• Hydraulic Power Pack
• Operating pressure 6MPa (60 bar)
• Max. permissible pressure 12 MPa (120 bar)
• Solenoid Valve, Spring Return Valve
• Actuation: switching solenoid OValve port pattern,hydraulic ISO/DIN 4401 size 02
• Low-leakage, self-sealing coupling nipples
• 24 V DC power 6.5 W output
• Operational instructions A comprehensive operationalmanual with laboratory sheets