As per IS:516, BS:1881 and ASTM C78, EN 12390-5, AASHTO T22, Fully automatic test execution. Controllable pace rate from 0.03 KN/Sec to 10 KN/Sec

Automatic Test Execution:
Once the machine has been switched on, the specimen positioned and centered, the only required operations are:

Set test parameters including load rate:

• Press the start button
• The machine automatically: starts the rapid approach; switches to the test speed once the specimen comes into contact with the upper platen; automatically stops the motor upon specimen failure
• Save the test including data results .
• The test execution conforming to Standards can be easily proved.
• Working on 240V, 50 60Hz, single phase.
• Dual stage pump assuring fast piston approach and precise test execution
• Test execution conforming to EN 12390-5, ASTM C78, AASHTO T22
• Controllable pace rate from 0.03 KN/Sec to 10 KN/Sec.
• Auto stop after completion of each test.
• Soft platen to specimen contact and smooth load rate control from the very beginning of the ramp
• Servo motor driven machine
• Auto calculation of the flexural strength after the failure of the sample.
• Calculation is done after failure of the sample by sending the distance of the nearest roller from the crack.

Frame:

• High stiffness welded frame tested for stability.
• Heavy duty spherical seat, allowing initial free alignment at the initial contact with the specimen and automatic jamming up to the end of test.
• Piston travel limit switch (Extra cost)
• Emergency stop button
• Servo motor driven machine
• Gives live online graph on the 7" touch screen
• User friendly large graphical display
• Saves 50 results in the 7" touch screen
• Inbuilt USB drive to save the data.

Salient features of data manager PC software (Optional at extra cost.):

• Two way communication i.e machine operates from computer and from the touch screen controller both (Stat, stop, save data and save graph)
• Results directly saved in excel file.
• Graph also saved in excel file.
• Capable to save customer name, other details of customer, ageing of beam moulds, identification mark of the beam moulds, date and time of testing
• Capable to print direct report from the computer.
• Capable to select different test parameters like pace rate, sample size and area from the computer (software)
• Capable to select different type of tests, like flexural, CTM, aggregate crushing etc.

Note: It is recommended to use the machine with 3 KVA servo stabilizer