Forced Air Drying Oven

1. Application: for Tissue Culture Laboratory and used for precise drying, heating, aging, burn-in, and hardening in various fields such as research, science, industry, and quality assurance.

Technical specification

1. Interior Dimensions (D x W x H) mm: 400 x 560 x 330 mm (±30mm)
2. Volume: 74 L
3. Housing: rear zinc-plated steel
4. Temperature:- Working Range: Min. 10°C to Max. 300°C
5. Setting range: Min. 20°C to Max. 300 °C
6. Setting accuracy: up to 99.9 °C: 0.1 / from 100 °C: 0.5
7. Sensor: 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error
8.  Ambient: Min. +5 °C to Max.+40 °C
9. Humidity rh: max. 80 %, non-condensing

Control technology:

1. Timer: Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
2. Calibration: three freely selectable temperature values
3. Adjustable parameters: temperature (Celsius or Fahrenheit), fan speed, air flap position, programme time, time zones, summertime/wintertime- 
4. Ventilation: Fan: forced air circulation by quiet air turbine, adjustable in 10 % steps
5.  Fresh air: Admixture of pre-heated fresh air by electronically adjustable air flap
6.  Vent: vent connection with restrictor flap
7. Safety
8. Temp. Control: mechanical temperature limiter TB, protection class 1
9. Over temperature monitor: Protect class 3.1
10.  Alarm: visual and acoustic
11.  Auto diagnostic system: for fault analysis
12.  Auto Safety: additionally integrated over- and under temperature monitor

Standard equipment:

1.  Works calibration: Calibration at +160°C
2.  Door: fully insulated stainless steel door with 2-point locking (compression door lock)
3.  Internals: 2 stainless steel grid(s), electropolished
4. Programming: have software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB port
5. Power Supply: AC 220V-240V with 2500 W
6. Net weight: 66 kg (±6kg)

Standard Requirement:

1. Standard and Compliance: CE, EAC, UL, DIN 12880 or equivalent.
2. Supplier Requirement Experiences: at least 5 years.
3. Language: English language available on machine and manual.
4. Warranty: At least 2 years on Mechanical, Electrical parts and Services.