Function Generator

Order Code: 22235818.7

Category: General Lab Equipment I

Wide frequency ranges from 1µHz ~ 25MHz (Sine Wave), 1 MHz ramp Frequency resolution: 1µHz Waveforms: Sine, square, ramp, pulse, noise, ARB Arbitrary functions:Sample rate: 120 MSa/s Repetition rate: 60 MHz,Waveform length: 4k po...



SPECIFICATION

  • Wide frequency ranges from 1µHz ~ 25MHz (Sine Wave), 1 MHz ramp
  • Frequency resolution: 1µHz
  • Waveforms: Sine, square, ramp, pulse, noise, ARB
  • Arbitrary functions:Sample rate: 120 MSa/s Repetition rate: 60 MHz,Waveform length: 4k points,Amplitude resolution: 10 bits
  • Output characteristics: Amplitude range: 1mVpp to 10Vpp (into 50Ω); 2mVpp to 20Vpp (open-circuit); 1mVpp to 5Vpp (into 50Ω) for 20MHz-25MHz; 2mVpp to 10Vpp (open-circuit) for 20MHz-25MHz
  • Offset range: ±5Vpk ac+dc (into 50Ω); ±10Vpk ac+dc (Open circuit); ±2.5Vpk ac+dc (into 50Ω) for 20MHz-25MHz; ±5Vpk ac+dc (Open circuit) for 20MHz-25MHz
  • Waveform output impedance: 50Ω typical (fixed); >10MΩ (output disabled)
  • Sine wave harmonic distortion: ≤-55dBc DC ~ 200kHz, Ampl > 0.1Vpp; ≤-50dBc 200kHz ~ 1MHz, Ampl > 0.1Vpp; ≤-35dBc 1MHz ~ 5MHz, Ampl > 0.1Vpp; ≤-30dBc 5MHz ~ 25MHz, Ampl > 0.1Vpp
  • Ramp linearity: < 0.1% of peak output
  • Pulse period: 40ns~2000s, Pulse width: 20ns~1999.9s, Should have AM modulation, FM modulation, PM, FSK, SUM, SWEEP, BURST functions, Should have Dual channel, External trigger & modulation input and trigger output facility, Frequency counter:Range: 5Hz to 150MHz
  • Interface: USB (Host & Device)
  • Display: 3.5" TFT LCD
  • Power source: 220~230V AC, 50Hz, 1 Phase

Enquiry Form