Investigation of simple stability problems

Order Code: 23246417.10

Category: General Lab Equipment II

Investigation  of  the  buckling  load  under different conditions (elastic joint, elastic fixed end)   Two-part  buckling  bar  with  central Joint Loading  continuously  variable &n...



SPECIFICATION

  1. Investigation  of  the  buckling  load  under different conditions (elastic joint, elastic fixed end)  
  2. Two-part  buckling  bar  with  central Joint
  3. Loading  continuously  variable  with  lever and weights
  4. Determination of loading via scale on load application lever
  5. Various degrees of clamping via leaf spring with  variable  length  on  bottom  support  
  6. Thrust pad guided friction-free inside spherical shell
  7. Low-friction joints with roller bearings
  8. Device to generate shear forces
  9. Storage system to house the components
  10. Experimental  setup  in  frame  Mounting frame


Technical data
Two-part  buckling bar with  central  joint, WxH: 20x20mm length:  2x250mm, support: pinned-pinned (articulated-articulated) Elastic joint, 2 tension springs, rigidity:  2N/mm, lever arm: 50mm Elastic clamp fixing with steel leaf spring length: 500mm cross-section: 10x2mm second moment of area: 6,66mm4 modulus of elasticity: 205000N/mm2  Compressive force range: 25...120N Shear force: 0...20N Load  application lever, lever ratio: 1:2...1:5 Weights, 2x 1N (hanger), 8x 1N, 6x 5N Dimensions and weight LxWxH: 1170x480x178mm (storage system) Weight: approx. 28kg (total) experiment and operations 

Enquiry Form