Method to determine the elastic line

Order Code: 23246417.3

Category: General Lab Equipment II

Comparison of different methods to determine the elastic line Statically determinate or indeterminate beam 2 supports with clamp fixing, optionally as articulated support with measurement of angle of inclination or clamp fixing 1 articulated...



SPECIFICATION

  1. Comparison of different methods to determine the elastic line
  2. Statically determinate or indeterminate beam
  3. 2 supports with clamp fixing, optionally as articulated support with measurement of angle of inclination or clamp fixing
  4. 1 articulated support with force gauge
  5. Device to generate a bending moment
  6. Dial  gauge  with  generation of  moment  to measure the angle of inclination
  7. Dial gauge to record the deformations of the beam
  8. Weights to subject the beam to point loads or moment
  9. Weights to determine the clamping moments on the supports with clamp fixings
  10. storage system to house the components
  11. experimental setup in frame for Mounting frame



Technical data

4 brass bars, L-695mm round bar, 0-6mm tube, slotted tube Ø-6mm, wall thickness: 1mm, slot width: 0,3mm square tube WxH: 6mm,  wall thickness: 1mm Disk to apply the load effective radius: 110mm Angle indicator measuring range: 190° graduation: 1 Weights, 1x 1N (hanger), 4x 1N  3x 5N Dimensions and weight LxWxH: 1170x480x178mm (storage system) Weight: approx. 27kg (total) experiment and operations Warranty: 2 years Installation: mandatory for full installations Training: mandatory for two operators to the bar by a mass disk, a 'deflection roller and weights

Enquiry Form