Solid-State Microwave Signal Source

1. Frequency Range: 8.6 ~ 9.6 GHz; Draft: ± 5×10-4/15 min; Display Error: ± 40 MHz
2. Output power > 20 mW
3. Attenuation Adjustment Range > 20 dB

Waveform : Equal Amplitude

1. Internal Modulation: Square-wave; Repetition Frequency 1000 Hz
2. External Modulation: Polarity: +/-; Amplitude: 5 ~ 40 VP-P;  Width: 0.2 ~ 3 μs; Frequency: 300
3. Narrow-band Frequency Scan ~ 3000 Hz
4. RF Output Connector Scan Width: > 50 MHz; Continuously Adjustable
5. Scan Output: N-type 50 Ω coaxial connector

Slotted Line Measurement Device

1. Frequency Range: 8.2 GHz ~ 12.4 GHz
2. Standing-wave Coefficient: ≤ 1.03 (synthesis voltage)
3. Probe Travel: 95 mm; Insertion Depth: 1.5 mm
4. Frequency-selective amplifier
5. Frequency Range: 400 Hz ~ 10 kHz
6. Input Voltage Dynamic Range: 10 μV ~ 2000 mV
7. Sensitivity: 10 μV (full scale)
8. Input Impedance: 20 kΩ (1 kHz)
9. Centimeter Wave Power Meter
10. Frequency Range: 8.6 GHz ~ 9.6 GHz
11. Power Range: 100 μW ~ 100 mW

Microwave Wavemeter

1. Frequency Range: 8.2 GHz ~ 12.4 GHz
2. Resolution: 0.005 GHz
3. Waveguides: Cross Section Dimensions
4. Inner: 22.86 mm × 10.16 mm (EIA: WR90 or IEC: R100)

Description:

1. Solid-state microwave signal source (@3 cm): 1
2. Slotted line measurement device (3 cm microwave): 1
3. Frequency-selective amplifier: 1
4. Centimeter wave power meter: 1
5. Variable attenuator: 1
6. Wavelength meter: 1
7. Detector: 1
8. Cable: 1
9. Detector display: 1
10. Isolator: 2
11. Circulator: 1
12. Variable reactor: 1
13. Single micrometer tuner: 1
14. Straight waveguide: 1
15. Matching load: 1
16. Short-circuit plate: 1
17. Resonant cavity: 1
18. Coupler plate: 1
19. Dielectric material sample: 3
20. Waveguide stand support: 3
21. Screw: 40
22. Instructional manual: 1
23. Precision variable attenuator: 2
24. H-type 90 degree curve waveguide: 2
25. H-type waveguide switch

Straight waveguide (L=150)

Directional Coupler

Mismatched Load (VSWR 1.5 or 2.0)

Mismatched Load (VSWR 6-7)