MAIN TARGET BOARD FEATURES
• Tactile reset pushbutton
• On-board crystal oscillator (exchangeable)
• One USB B type connector for USB development
• Connector to ICSP
• MCU I/O pinouts accessible via standard DIL connectors (4 x 10 ways)
• Bus expansion interface for PIC (via SIL turned pin sockets)
• UART connector on board
• 1 x RS232C DB9 serial port
• Operating Input Voltage: 12VDC regulated via AC-DC Power Adapter.

USB PROGRAMMER FEATURES
• Portable & user friendly
• Built-in 40 way ZIF programming socket to accommodate PIC devices up to 40 pins DIL such as the PIC12Fxx, PIC16Fxxx, PIC18Fxxx & etc.
• Built-in ICSP pinout connector for In-Circuit Serial device programming
• LED status indicators for power and ready/busy function
• Features fast and reliable programming
• Interface with PC’s desktop or laptop’s USB ports
• External power supply not required
• Fully compatible with MP LAB IDE or PIC KIT2 software
• Compatible with PICkit2's Logic Tool and UART Tool

APPLICATION MODULE FEATURES

1. BASIC INTERFACE I/O MODULE
2. 8 output LEDs
3. 8 input DIP switches
4. Buzzer (x1)
5. 4 pushbuttons
6. On-board module selector via
7. SIL jumper setting
8. External +5V input(switch able) via 2-way terminal connector
9. 5V power input LED indicator

DISPLAY INTERFACE MODULE

1. Large Dot-Matrix Display
2. Dual digit 7-segment LEDs with decoder driver
3. On-board module selector via SIL jumper setting
4. External +5V input (switch able) via 2-way terminal connector
5. 5V power input LED indicator

KEYPAD AND LCD INTERFACE MODULE

1. 4x 4 matrix keypad
2. 16 x 2 LCD display with backlight & contrast control
3. External +5V input (switch able) via 2-way terminal connector
4. 5V power input LED indicator

REAL TIME CLOCK INTERFACE (RTC) MODULE

1. DS1307 RTC chipset with 32.768KHz crystal oscillator
2. Provision for I2C serial interface with 24Cxx serial EEPROM
3. 16x2 LCD module with contrast control
4. CR2032 backup battery with holder
5. External 5V input via screw terminals

ADC & DAC INTERFACE MODULE

1. 8-bit ADC
2. 8-bit DAC
3. Analog input/output connector
4. Support with PICMirco analogue
5. bit input selector RA0 or RA1
6. 8-bit digital output via connector interface to LEDs on
7. Operate with Basic I/O board
8. External 5V input via screw terminals

MOTOR INTERFACE MODULE

1. Industrial DC motor twin driver come with 12V motor(x1)
2. Quad RC servo motor driver, includes servo motor(x1)
3. Stepper motor driver come with 12V stepper motor(x1)
4. DC motor driver come with 12V DC motor (x1)
5. External 5V and 12V input via 2-way terminal connector
6. On-board module selector via SIL jumper setting
7. LED indicators for power supply

RELAY INTERFACE MODULE

1. 4 relays on board
2. Screw terminal interface for relay’s NC, NO and COM
3. Relay trigger voltage: 5V, Relay output contact ratings:240VAC/7A
4. Relay’s triggering transistor driver circuit with protection
5. LED indicators for each triggered relay operation
6. External 5V and 12V input via
7. 2-way terminal connector

TEMPERATURE INTERFACE MODULE

1. Temperature sensor using LM335Z
2. Built-in heater element with LED indicator
3. ADC with signal conditioning circuit
4. Light Sensor (LDR)
5. One unit DC fan for temperature control
6. External 5V & 12V input via screw terminals

Acessories 

1. User/Instruction Manual x 1(hardcopy & softcopy)
2. Lab Experiment Manual with solution x1 (hardcopy & softcopy)
3. Power Supply Unit x 1
4. 1 x USB Cable
5. Utility Software CD (Development IDE with Lite C Compiler freeware)
6. Sample I/O Application Programs Coding
7. PIC Microcontroller Device Sample – PIC16F877A(1x)
8. FLEX Interface cable (1 set)

Training at site for 1 day 

1 Years warranty on manufacturer defects.