Specifications:-

Measurement and generation capabilities :

• AC/DC voltage 
• mA current loop with 24 V loop power supply 
• Pressure 
• Thermocouples and resistance thermometers 
• Frequency 
• Resistance

Data logging functions : 

• Functions measuring functions: Voltage, current resistance, frequency, temperature, pressure
• Reading speed: 1, 2, 5, 10, 20, 30 or 60 readings/minute
• Maximum recording length: 8,000 readings (7,980 for 30 or 60 readings/minute)

Ramp functions :

• Functions of generation: Voltage, current, resistance, frequency, temperature
• Rate: 4 steps/second
• Trigger detection: Continuity or voltage (continuity detection is not available when generating current)

Loop feed function :

• Voltage: Selectable, 26 V
• Accuracy: 10%, 18 V minimum at 22 mA
• Maximum current: 25 mA, short-circuit protected
• Maximum input voltage: 50 V DC

Step-by-step functions :

• Generation functions: Voltage, current, resistance, frequency, temperature
• Manual step: Selectable step, editable with arrows 
• Fully programmable as function, start delay, step value, time per step, repeat.

Environmental features : 

• Operating temperature: -10°C to +50°C
• Storage temperature: -20 °C to +60 °C
• Dust/water tightness: Meets IP52, IEC 529 standards

General and mechanical characteristics :

Side port connections : 

• Pressure module connector
• USB connector for PC connection
• Digital instrument connector (HART)
• Data storage capacity: 1 week of calibration procedure results

Calibrator accessories:

• Fluke BC7240 Battery Adapter/Charger for Memory Process Calibrator
• Flexible zippered multimeter case with removable front compartment 

SureGrip™ alligator clip probe set:

• A pair (red, black) of small nickel-plated insulated jaws
• Rounded tip to grip round screw heads up to 9.5 mm
• Recommended for TL222 and TL224 test leads
• CAT IV 600 V; CAT III 1000 V, 10 A certification. CSA certification

Set of mini-hook measuring leads :

• One pair of test leads (red and black) with 4 mm banana plugs and mini-hooks
• The mini-hooks attach to the leads of components up to 1.5 mm in diameter.