Single phase 1 HP Induction motor

Order Code: 25269087.E.22

Category: General Lab Equipment V

Single phase 1 HP Induction motor



SPECIFICATION

Single phase 1 HP Induction motor 

Phase   single phase, No. of pole   4, Type Capacitor type Rated power   1 HP or 0.75 KW, Rated voltage   230 Volt , Speed 1440 RPM,  Frequency   50 Hz , IP rating   IP44, Insulation Class   A Material   Cast iron, Winding material   Copper, Machine Control Panel & Operating Area Control panel board consist of high grade FRP material or better material in compliance with relevant IS/IEC safety standards.

  • The Electrical Control Panel dimensions  Minimum size of size Length   900 mm; Depth   250 mm; Height   750 mm or a pre approved design of bidder with NABL Tested lab certificate of electrical safety.
  • The rear of the panel covered with transparent sheet removable   so that the circuit connections are visible and electrically safe with suitable locking arrangement.
  • Control panel mounted and to be fixed on a Frame stand via Nut bolt or any arrangement through which the panel can be removed easily.
  • The MS Frame/stand made of suitable size of MS channel/angle/Square Pipe or better type.
  • Frame/stand rust free power coated.
  • The floor height of the Frame/Stand’s Top Min. 900 mm so that the control panel mounted on  900 mm from floor. The MS Stand/frame shall have suitable foundation arrangement.
  • The working area arrangement fitted on front top side of the Stand/frame. The Working area of Minimum dimensions as Length   900 mm and Width   300 mm 

Enquiry Form