Solar Battery Charger

Order Code: 25268730.3.1

Category: General Lab Equipment V

  Minimum battery capacity of 25,000 mAh. Material: high-strength ABS, or an equivalent or higher-grade material. Dual charging capability, via solar panel and USB (USB-C or Micro USB). Minimum input interfaces shall include at least...



SPECIFICATION

 

  1. Minimum battery capacity of 25,000 mAh.
  2. Material: high-strength ABS, or an equivalent or higher-grade material.
  3. Dual charging capability, via solar panel and USB (USB-C or Micro USB).
  4. Minimum input interfaces shall include at least:
  5. i-USB-C and Micro USB. 
  6. ii-A solar panel must be integrated or externally foldable (minimum 4 high-efficiency panels).
  7. Simultaneous charging: Supports at least 3 devices simultaneously.
  8. The device shall provide output through all of the following standards, at a minimum: USB-A, USB-C, Lightning, and Micro USB.
  9. This requirement must be met either through integrated physical output ports or through bundled, interface-specific cables or adapters.
  10. If output is provided via cables or adapters rather than embedded connectors, the supplier shall include no fewer than four (4) spare units per connector type.
  11. The solar charging system must have integrated or foldable panels with:
  12. Panel type: Monocrystalline or equivalent high-efficiency
    1. Minimum panel count: 4 (four) connected cells
    2. Total output power: ≥?6?W
    3.  Conversion efficiency: ≥?20%
    4. Voltage Output: 5V DC 
  13. Built-in LED flashlight with 3 operational modes: high, strobe, SOS
  14. Portable and lightweight, with maximum dimensions (in folded/transport configuration) not exceeding approximately 20% above or below the following reference: 18 × 9 × 3 cm (L × W × H). 
  15. Protection Features: overcharge, over-voltage, and short-circuit.
  16. Ingress protection rating: IPX5 or higher
  17. Output Control: smart and/or automatic current and voltage adjustment
  18. Accessories included
  19. Include at least one (1) USB-C Power Delivery (PD) certified cable
  20. USB-powered AA/AAA battery charger with slot for 4 batteries, including two (2) sets of (four) 04 rechargeable AA batteries and two (2) sets of (four) 04 rechargeable AAA batteries The AA/AAA battery charger shall include all required USB cables for power connection (e.g., USB-A to Micro USB or USB-C), enabling full compatibility with standard solar power bank outputs.
  21. Storage Case
  22. Items to be Supplied with
  23. Detailed step-by-step instructions for use and cleaning in pictograms.
  24. Accessories included in the price offered.

Enquiry Form