Spectrum analyzer
Order Code: 23246869.34
Category: General Lab Equipment II
Main Features Frequency Range from 9 kHz up to 3.6 GHz 150dBm Displayed Average Noise Level Phase Noise -82dBc/Hz@1Gz and offset at 10KHz Total Amplitude Accuracy <1.5dB 10Hz Minimum Resolution Bandwidth (RBW) EMI Pre-complia...
SPECIFICATION
Main Features
- Frequency Range from 9 kHz up to 3.6 GHz
- 150dBm Displayed Average Noise Level
- Phase Noise -82dBc/Hz@1Gz and offset at 10KHz
- Total Amplitude Accuracy <1.5dB
- 10Hz Minimum Resolution Bandwidth (RBW)
- EMI Pre-compliance Test Kit
- Up to 3.6 GHz Tracking Generator Kit
- 10.4 inches display
| Specifications | |
| Frequency | |
| Range | 9kHz-3.6 Ghz |
| Resolution | 1Hz |
| Frequency span | |
| Range | 0 Hz, 100 Hz to maximum frequency of device |
| Accuracy | ± span /(swept points -1) |
| Internal reference | |
| Reference frequency | 10.000000 Mhz |
| Reference frequency accuracy | ±[(days from last calibrate × freq aging rate) + temperature stability + initial accuracy ] |
| Temperature stability | <2.5ppm (15? to 35?) |
| Aging rate | <1ppm/year |
| Readout | |
| Marker frequency resolution | span/(the number of sweep points -1) |
| Uncertainty | ±(freq indication × freq reference uncertainty +1%× span +10%× resolution bandwidth + Marker Frequency Resolution) |
| Frequency counter | |
| Resolution | 1 Hz,10 Hz,100 Hz,1 kHz |
| Accuracy | ± (marker freq × freq reference uncertainty + counter resolution) |
| Bandwidth | |
| Resolution bandwidth (-3 dB) | 10Hz to 500kHz (in 1 to 10 sequence), 1MHz, 3MHz |
| Resolution filter shape factor | <5: 1 nominal (Digital implement, similar to Gauss Pattern) |
| Accuracy | <5% nominal |
| Video bandwidth (-3 dB) | 10Hz to 3MHz |
| Amplitude and electric level | |
| Amplitude measurement range | DANL to +20 dBm? close the preamplifier |
| Reference electric level | -80 dBm to +30 dBm?0.1dBm steps |
| Preamplifier | 20 dB?nominal |
| Input attenuator range | 0~39 dB?3 dB steps |
| Max input DC voltage | 50 VDC |
| Max continuous power | 30dBm?average continuous power |
| Displayed average noise level?DANL?Input attenuation 0 dB?1Hz resolution bandwidth | |
| Preamp off | 1 MHz~10 MHz -140dBm?nominated? |
| 10 MHz~1GHz -140dBm?nominated? | |
| SA1015TG:1GHz~1.5 GHz -138 dBm( nominated ) | |
| Preamp on | 1 MHz~10 MHz -160dBm?nominated? |
| 10 MHz~1GHz -160dBm?nominated? | |
| SA1015TG: 1GHz~1.5 GHz -158 dBm( nominated ) | |
| Phase noise | 20 ? ~30 ??fc=1 GHz |
| Phase noise | <-82 dBc/Hz @10 kHz offset |
| <-100 dBc/Hz @100 kHz offset | |
| <-110 dBc/Hz @1 MHz offset | |
| Level display range | |
| Log scale coordinate | 1dB ~255dB |
| Linear scale coordinate | 0 to reference level |
| level unit | dBm, dBuW, dBpW, dBmV, dBuV, W,V |
| Points | 201~1001 |
| Number of traces | 5 |
| Detectors | Positive-peak, negative-peak, sample, normal, RMS |
| Trace functions | Clear write, Max Hold, Min Hold, View, Blank, Average |
| Frequency response | |
| 20? ~30??30%~70% relative humidity, 20 dB input attenuation, reference 50 MHz |
|
| Preamp off | ±0.8 dB? |
| Preamp on | ±0.9 dB? |
| Accuracy | |
| Input Attenuation Switching Uncertainty | 20? ~30?? fc=50 MHz?Preamplifier Off? 20dB RF attenuation?input signal 1~40 dB ±0.5 dB |
| Absolute Amplitude Uncertainty |
20? ~30?? fc=50 MHz?RBW=1 kHz?VBW=1 kHz?peak detector, 20 dB Preamplifier Off ±0.4 dB?input signal= -20dBm |
| Uncertainty | input signal range 0dbm~-50dbm |
| ±1.5 dB | |
| VSWR | input 10 dB RF attenuation?1 MHz~1.5GHz |
| <1.5?nominal | |
| Distortion and spurious response | |
| Second harmonic distortion | fc ≥ 50 MHz?Preamp off, signal input -30 dBm, 0 dB RF attenuation, 20 ? to 30 ? |
| -65dbc | |
| Third-order intermodulation | fc ≥ 50 MHz |
| +10 dBm | |
| 1 dB Gain Compression | fc ≥ 50 MHz? 0 dB RF attenuation?Preamp off , 20 ? to 30 ? |
| +2 dBm, nominal | |
| Residual response | connect 50 Ω load at input port?0 dB input attenuation?20 ? to 30 ? |
| <-85dBm?nominated | |
| Input related spurious | -30 dBm signal at input mixer?20 ? to 30 ? |
| <-60 dBc | |
| Sweep time and triggering | |
| Span range |
100Hz≤SPAN≤3GHz 10ms to 3000s zero sweep width 1ms to 3000s |
| Mode | Continue, single |
| Trigger | Free run, video |
| Tracking generator | |
| Output frequency range | 100 kHz~3.6 GHz?Tracking generator? |
| 35 MHz~3.6 GHz?Tracking generator? | |
| Output power level range | -30 dBm~0 dBm ? |
| Output power level resolution | 1dB |
| Output flatness | +/-3 dB |
| Maximum safe reverse level | Average total power?30 dBm?DC : ±50 VDC |
| Inputs and Outputs | |
| Front panel RF input connector | 50 Ω?N-type female |
| Front panel track generator output | 50 Ω?N-type female |
| 10 M reference input | 50 Ω?N-type female |
| Communication port | USB HOST, USB DEVICE, LAN, earphone port, REF and VGA |
| General technical specification | |
| Display | TFT LCD?10.4 inches |
| Weight (without package) | About 5 kg |
| Weight (without package) | About 5 kg |
| Dimension (W × H × D) | 421 × 221 × 115 (mm) |
Enquiry Form
Related Product
Tesca specialize in doing turnkey projects that is fully operable when it is handed over to the project authority. Starting from inception to application training, Tesca provides the services as ONE source solution. Working side by side with government authorities and people across the World, we help countries to perform better. We support countries grow their economies, strengthen their education and health systems and improve financial management. We do this by providing consultancy & training in environment safety, education, health strengthening.
Category
Useful Links
Contact Us
International Sales:
91-9829132777
91-9413330765
India Sales:
91-9588842361
2026 © All Rights Reserved.