8051 Microcontroller Trainer Kit with ADC, DAC

Order Code: 43215A

Category: Embedded Trainers

43215A is a single board Microcontroller Trainer Kit based on 8 bit 8051 Microcontroller, which is widely used to train engineers to develop on software/hardware for any industrial process & control. Kit has power-full Monitor EPROM, RAM, I/...



SPECIFICATION

43215A is a single board Microcontroller Trainer Kit based on 8 bit 8051 Microcontroller, which is widely used to train engineers to develop on software/hardware for any industrial process & control. Kit has power-full Monitor EPROM, RAM, I/O Lines, Timer/Counter, Serial, LCD Display, Keyboard for Man to Machine Interface.

Features

  • 16K Bytes of EPROM with 32K bytes of Battery Backup RAM.
  • 48 I/O Lines, Three Channel Timer/Counter, PC Serial Interface using USART, 12 bit ADC, DAC, RTC.
  • 20x2 LCD Display with 101 ASCII Keyboard.
  • Power-full Command like Single Stepping, Break Point, Full Clock Execution, Examine Memory/Registor.
  • Uploading & Downloading to and from PC in Windows98/XP/NT.
  • In-Built Power Supply.

Specifications

  • 8051/89C52/89C51RD2/89C61X2 CPU operating @11.0592MHz.
  • 32K user RAM using 6264 with Battery Backup using NICD Battery.
  • One socket is provided for RAM expansion up to 64K.
  • 16K bytes of powerful monitor EPROM using 27512.
  • 48 I/O lines using 2 Nos. of 8255 brought at 26 Pins FRC Connector to interface with IC-XX Series.
  • Three Channel Timer/Counter using 8253.
  • 20x2/40x2/20x4 Alphanumeric LCD Display with Backlite
  • 101 ASCII Keyboard interface using 89c2051 operating @ 12MHz
  • On-board Single Line Assembler & Disassembler.
  • Two External interrupts INT0 & INT1 are available at 40 pin FRC connector.
  • RS-232C using RX/TX of 8051.
  • Two modes of operation: - Keyboard Mode, Serial Mode.
  • Powerful Commands like Examine/Edit Memory, Examine/Edit Register, Single stepping, Execution, Break Point can be used through ASCII keyboard or PC serial mode.
  • Facility for Downloading/Uploading files from/to PC.
  • All Address, Data, Control & Port lines are available on 40 Pins & 20 Pins FRC Connector.
  • All IC’s are mounted on IC Sockets.
  • Bare board Tested Glass Epoxy SMOBC PCB is used.
  • In-Built Power Supply of +5V/1.5A, ±12V/250mA
  • Attractive Wooden enclosures of Light weight Australian Pine Wood.
  • User's Manual with sample programs.
  • 270mm x 185mm x 105mm (L x W x H).
  • Weight 3 Kgs.

Optional

  • On-board ISP (In-system Programming)Facility.
  • PRINTER INTERFACE to interface with DOT MATRIX Printer.
  • RS-232C interface using 8251.
  • On-board 12 Bit ADC using Ad574.
  • On-board 8 bit DAC using DAC-0800.

Enquiry Form