HMP™_11A Resilient Seal Gate Valves

Order Code: HMP™_11A

Category: Range of Check Gate and Butterfly Valves

OVERVIEW The HMP™_11A PN16 Resilient Seal Gate valve were designed for easy seating. Not a lot of force is needed for the closing of the valve, due to the EDPM (rubber) encapsulated gate. This valve is widely used in low pressure application...



SPECIFICATION

OVERVIEW

The HMP™_11A PN16 Resilient Seal Gate valve were designed for easy seating. Not a lot of force is needed for the closing of the valve, due to the EDPM (rubber) encapsulated gate. This valve is widely used in low pressure applications below 1.6 MPa such as water treatment, water distribution, mining and power generations applications. The HMP™_11A PN16 Resilient Seal Gate valve are manufactured with a bolted bonnet, flanged, face to face dimensions to SANS 665 / BS 5163 pattern, rising spindle and it's handwheel operated. The benefit of using rising spindle gate valve is that it can immediately be seen if the valve is in an open, closed or partly open position. 

HMP 11A Resilient Seal Gate Valves Dims

LOW OPERATING TORQUE

The HMP™_11A PN16 Resilient Seal Gate Valve is quite easy opening and closing under pressure with a low operating torque.

LOW MAINTENANCE REQUIREMENT

The HMP™_11A PN16 Resilient Seal Gate valve does not have a lot of parts and does not require a lot maintenance. 

MATERIALS OF CONSTRUCTION

HMP 11A Resilient Seal Gate Valves Mat

DIMENSIONS

HMP 11A Resilient Seal Gate Valves Dims Schedule

DESIGN AND MANUFACTURING STANDARDS

The HMP™_11A PN16 Resilient Seal Gate Valve are designed in accordance with various international standards as set out below:
SANS 665 BS 5163

Flange drilling can be drilled to the following standards:
ANSI B16.1 Class 125
ANSI B16.5 Class 150
SANS 1123 T600
SANS 1123 T1000
SANS 1123 T1600
EN1092 PN10 and PN16

BS 4504 / D.I.N. T6
BS 4504 / D.I.N. T10
BS 4504 / D.I.N. T16
BS 10 / AS2129 Table D
BS 10 / AS2129 Table E
JIS B2239 5K and 10K

Enquiry Form