Hot Air Oven-Digital with Forced Air Circulation - 250°C - S.S. Chamber 125 X 125 X 100

Order Code: MT527

Category: General Equipment's

Double walled, inner chamber S.S.304, Outer CRC powder coated , 65 mm thick glass wool insulation , 80/20 nichrome heating elements placed under ribs at bottom and sides for uniform heat distribution Temp. Range. 50?C to 250?C , Auto tune Dual Displa...



SPECIFICATION

Double walled, inner chamber S.S.304, Outer CRC powder coated , 65 mm thick glass wool insulation , 80/20 nichrome heating elements placed under ribs at bottom and sides for uniform heat distribution Temp. Range. 50?C to 250?C , Auto tune Dual Display Digital, forced air circulation, Working on 230 Volts AC Single Phase.

Salient Features :
Internal circuit wiring as per CE Norms
65mm high density Glass wool insulation on all sides to offer minimum chamber heat loss
Oven is fitted with heating elements on all three sides, ensuring uniform  temperature distribution throughout the working chamber
Sealed and enclosed heaters to working chamber for minimum heat  loss
80/20 nichrome heating elements, ensuring long lasting and continuous heating within the chamber
Special heavy duty Stainless steel lock and door hinges with  spring and roller mechanism
Stainless steel crimped wire mesh Shelves to withstand heavy load and to offer minimum resistance to air circulation for better heat  distribution
Provision to add more shelves, as per requirement of test - Adjustable Shelves to place test samples or Glass wares of varying  dimensions
Adjustable air ventilation mounted at top
Operation on 220/230 Volt, 50 Hz, Single phase, AC Supply
With built-in forced air circulation arrangement for uniform heat distribution inside the working chamber
Complete with pilot indicating lamps, 2 meter cord wire and power plug.

Optional accessories At Extra Cost:
Soak timer 

The timer will be ON automatically as soon as the set temp. has been attained and will cut off the current to heaters after pre set timing, Range 999 Hours or 0?59 minutes (selectable).

 

Technical Specification

Working size

125 x 125 x 100 cm ( H x W x D)

Chamber volume

-

No of trays

03 Numbers

Rating

2.5 KW

Outer Chamber

CRC - powder coated

Inner chamber

Made of Stainless Steel S.S. 304 mirror polished material.

Temperature Range

50 °C to 250 °C

Exterior body

Made of mild steel material, which is powder coated in attractive shades

Insulation

65mm high density Glass wool insulation on all sides to offer minimum chamber heat loss

Heating element

Oven is fitted with heating elements on all three sides, ensuring uniform temperature distribution throughout the working chamber

Heater

Sealed and enclosed heaters to working chamber for minimum heat loss

Temperature Control

Microprocessor based Auto tune PID Digital temperature indicator cum controller

Heating element

80/20 nichrome heating elements, ensuring long lasting and continuous heating within the chamber

Control Accuracy

± 1°C or better

Door lock

Special heavy duty Stainless steel lock and door hinges with spring and roller mechanism

Shelves

S.S. crimped wire mesh Shelves to withstand heavy load and to offer minimum resistance to air circulation for better heat distribution

Other provisions

Provision to add more shelves, as per requirement of test Adjustable Shelves to place test samples or Glass ares of varying dimensions

Air ventilation

Adjustable air ventilation mounted at top

Forced Air circulation

With built in forced air circulation arrangement for uniform heat distribution inside the working chamber

Complete with

Complete with pilot indicating lamps, 2 meter cord wire and power plug.

Operation on

220/230 Volt, 50 Hz, Single phase, AC Supply

Enquiry Form