MULTI-POINT ELECTRONIC INJECTION SYSTEM - MPI (on stand with wheels) electrical

Order Code: 25269440.3

Category: General Lab Equipment V

MULTI-POINT ELECTRONIC INJECTION SYSTEM - MPI (on stand with wheels) electrical



SPECIFICATION

MULTI-POINT ELECTRONIC INJECTION SYSTEM - MPI (on stand with wheels) electrical

  1. The panel shows the functioning of an electronic injection system. It is possible to regulate the rpm
  2. from 0 to 2000 rpm by means of a pedal. It can simulate the air pressure sensor in the collector and the
  3. water temperature. It is possible to generate sensors and actuators faults disconnecting the relevant
  4. EOBD connections interface (standard with K line and 7 pins).

Main technical specifications:

  1. Fuel tank
  2. Electric fuel pump (N40)
  3. Multifunction valve
  4. Safety valve
  5. Fuel delivery pipe
  6. Electronic injection/ignition control unit
  7. (M10)
  8. Battery
  9. Ignition switch
  10. Inertia switch (I50)
  11. Engine compartment junction unit
  12. Climate control system
  13. Fuel vapour cut out solenoid valve (L10)
  14. Injection timing sensor (K47)
  15. Activated carbon filter
  16. Body Computer (diagnostic socket and Fiat CODE signal)
  17. Temperature/absolute pressure sensor (K44)
  18. Rpm sensor (K46)
  19. Spark plugs
  20. Coolant temperature sensor (K45)
  21. Injectors (N70)
  22. Throttle valve position sensor (K56)
  23. Idle speed actuator (N74)
  24. Fuel supply rail
  25. Air filter
  26. Ignition coils (A30)
  27. Lambda sensor (upstream) (K15)
  28. System failure warning light
  29. Rev. counter
  30. Catalytic converter
  31. Lambda sensor (downstream) (K16)
  32. Approx. weight and dim.:Cm 140x80x200h
  33. Net Weight: kg 96
  34. Gross Weight: kg 175

Enquiry Form