As per ASTM 1202 - 05 including :

• Each RCPT cell will be made up of transparent acrylic material of 150 * 150mm* 50mm thick as per ASTMC 1202.
• It will hold the concrete specimen of 100mm diameter 50mm thick.
• It will be provided with rubber gasket and washers for achieving leak proof.
• Stainless steel bolts with washers and nuts will be provided to hold the specimen rigidly.
• The power supply will be applied to each cell through banana sockets and the current will be distributed through the brass mesh.
• Each cell will be provided with openings in top for pouring chemicals and the temperature sensors. The openings can be closed with lids.
• The volume of chemicals within the chamber shall be 250ml.
• No. Of cells       :  Four cells
• Power supply    :  0-99.9 volt DC adjustable provide supply to Four cells
• Protections       :  fuse for each cell
• Indications        :  digital voltmeter three digit seven segment LED display
• Cells details      :  as per the specifications
• Dc supply can be varied from 0-99.9 volts continuously
• DC supply should be provided to all the four channels simultaneously and the current flow through each cell will be separately monitored.
• Flexible cables with the banana type pins will be provided for all the cells to establish the connection with the apparatus.
• Temperature of each cell also monitored and recorded.
• The observation screen is 7" coloured touch screen with advance data acquisition system.

Data acquisition Processing system and software:

• DC voltage in 0-99.9volt, current in 999.9 milliamp. and the temperature  of chemical solutions in 99.9 deg Centigrade (maximum values)
• LCD displays indicate all the parameters continuously. All the data are transmitted to the computer simultaneously.
• Record Interval time set    :  0-99hr, 0-99min and 0-99 Sec, 
• Total log time set         :  0-99hr, 0-99min and 0-99 Sec.
• The set values are settable through key pad switches provided
• Totally eight parameters, four numbers of cell current and four numbers of temperature of the cell chemicals are displayed
• All the acquired data are transferred to the PC through RS232 output and through USB
• The monitor display the present current reading as well as the cumulative current reading.
• At the end of test, quartz buzzer is activated and the PC saves the readings in a separate file.
• For graphical display software is provided.

Supplied Complete with.....

• Plexiglass chambers with conductive brass mesh, terminals and  Steel bolts - 4 pairs
• DC Constant voltage power supply (220 V) cum DAQ unit with 4 channels. - 1 No.
• 300 mm vacuum desiccators. - 1 No.
• Vacuum pump - 1 No.
• Moisture trap with vacuum gauge - 1 No.
• Elastomeric Rubber Moulds for cylindrical specimens - 4 No.
• Thermocouples - 4 No.
• Consumables - good for 1 doz. tests
• RTV sealant + gun - 1 No.
• Acrylic sealer , Brush - 1 each
• NaCl, NaOH - 1 each
• Mould Release - 1 No.

Overall Dimensions     :    590 X 330 X 410(L X W X D) mm