MAIN TARGET BOARD FEATURES
• On board 40 way ZIF sockets that accepts PIC Microcontroller 40 pins DIP devices.
• Support most PIC 16F & PIC18F series (40 pins) such as PIC16F877A,PIC18F4520, PIC18F4550 (USB) & other pin compatible MCU. One PIC16F877A microcontroller is included as sample device
• 28 way ZIF socket(x1), 18 pins DIP IC socket (x1) to support 28/18 DIP pins PIC MCUs
• Power switch with indicator
• On-board 5VDC power voltage regulator
• Tactile reset pushbutton
• On-board crystal oscillator (exchangeable)
• One USB B type connector for USB development
• Connector to ICSP
• MCU I/O pinouts accessible via standard DIL connectors (4 x 10 ways)
• Bus expansion interface for PIC (via SIL turned pin sockets)
• UART connector on board
• 1 x RS232C DB9 serial port
• Operating Input Voltage: 12VDC regulated via AC-DC Power Adapter

USB PROGRAMMER FEATURES-

1. USB Programmer Interface
2. GUI windows-based PIC Programmer Interface software
3. (Compatible with MPLAD IDE )
4. Supports ICSP interface with ICSP connector ready
5. Operates with PC running under Windows operating system.
6. Reads, programs, varies EPROM/EEPROM program and data memory.
7. Reads, programs, varies configuration bits.
8. Programs and varies address range.

APPLICATION INTERFACE SPECIFICATION

1. LCD Display 16x2
2. 4 x 4 Matrix Keyboard
3. Buzzer x 1
4. 8 Input Data Switches
5. 4 input push button
6. 8 Output Coloured LEDs
7. Dual 7-segment LEDs
8. IC/ SPI EEPROM interface
9. Input/output Interface IDE Connectors
10. ADC input with 3 source: On board Potentiometer, LM3xZ temperature sensor or can connect to external optional sensor
11. DC motor, 9V~12V operated, Rated current: 40mA, Speed: approx 100
12. RPM(min.), integrated with rotary encoder to o_er rotation feedback.
13. One DC RC servo motor, 4.8 – 6.0V operate, Rated speed: 0.13 sec/ 60 degree.
14. One Stepper Motor with driver circuit
15. One relay (5V triggered) with 6A relay output(NC/NO contacts).
16. One 32.768KHz Crystal for Real Time Clock (RTC) using Interrupt.
17. One External Real Time Clock IC (DS1307) with back up battery for I2C protocol development.
18. Provision for one external serial EEPROM with SPI interface (24Cxx).

PRODUCT ACCESSORIES

1. User/Instruction Manual x 1(hardcopy & softcopy)
2. Lab Experiment Manual with solution x1 (hardcopy & softcopy)
3. Power Supply Unit x 1
4. 1 x USB Cable
5. FLEX Interface cable (1 set)
6. Utility Software CD (Development IDE with Lite C Compiler freeware)
7. Sample I/O Application Programs in Assembly, PIC Basic
8. PIC Microcontroller Device Sample – PIC16F877A(1x)
9. 1 x Metal Case Housing
10. 1 x Solderless Prototyping Breadboard

Training at site for 1 day 

1 year warranty against manufacturing defects